wiskey: Thank you very much for that info. Very helpful! At first I filled the trans until it showed up properly on the dipstick but that required much more than the 3.2 qts. the manual called for. But I had to use over five quarts to reache the mark on the dipstick. But I did NOT want to overfill my trans, of course. So I then just went ahead and used the 3.2 qts called for and figured (hoped) that the dipstick wasn't reading properly somehow. But with our info, I will start using 4 quarts and maybe a little more. But to make my fluid come up to the mark on the dipstick I have to put in over five quarts so I'm still a little concerned. But the trans works fine with either over 5 quarts added or 3.2 quarts so 4 quarts (or a bit more) is right in the middle and should work fine. Thanks again for your response.