Originally Posted by A-dub5513

I'm not exactly sure what the problem may be, but it appears that I'm not able to build fuel pressure.

So far, I've replaced the pump, and just today, the fuel filter. I'm wondering, is it possible, or even likely, for pieces of the teflon tape that [I]was[I] used to attach the under hood fuel gauge and the fuel sender on top of the filter to flow downstream and clog the injectors?

The teflon tape was recommended as per the B&M instuctions for the gauge, if I remember right, but didn't use it this time around.

Thanks for reading,
Adub