Originally Posted by
sharshera
Hi all,
I bought two used transmitters for my 97 Accord SE and I got the instruction from you guys here as well as from the good guys at
http://www.collegehillshonda.com/art...ticle_41.shtml
I tried it several times and I never hear the car cycling the locks at all.
The FOB were tested by their seller on ebay, supposedly and they should work.
I have the FOBs with FCC IDs as A269ZUA106.
The FOBs when pressed have a very small red led light going on just above the LOCK button. I am not sure what does that mean? Does it mean low battery or it mean it is working?
Any suggestions are highly appreciated.
The instructions as follows is what worked:
http://www.ehow.com/how_6219012_program-se-keyless-entry-remote.html
Step 1
Unlock all the doors on the vehicle.
Step 2
Put the key in the ignition and turn it to the on position.
Step 3
Press either the lock or unlock button on the remote.
Step 4
Turn the key to the off position and then quickly return it to the on position. Press the lock or unlock button on the remote. Repeat this step three times. You should end with the key in the on position.
Step 5
Press the lock button on the remote. The door locks will cycle once to let you know the remote is properly programmed. Press the lock buttons on any other remotes within 10 seconds to program them as well.