Originally Posted by
Cyrex17
If I pump the pedal a few times it doesn't fall to the floor. I didn't bench bleed the MC before installing it. I do have a haynes manual and I'll go through the procedures. Even if I didn't bench bleed the MC, shouldn't all of the air have been removed when I bled the brake lines? I checked my lines and there was no air in them. I'll do the bedding in procedure and let you know what happens.
at this point i don't think your problem has anything to do with air in the lines. lots of ceramic pads feel soft(compared to stock or metallic pads), even after a proper bedding in procedure. if things don't improve after the bedding in, it might be just something you have to get used to and live with. however, i suspect after the bedding it in, the pedal feel will improve