Well I just got my car all up and running today. Ran into a couple problems along the way. First thing I ran into was when I tried to put the head on my new block. As I was torquing down my last head bolt, It pulled the threads out. After repairing that and installing the engine, I went to start it up. Come to find that the PCV system was changed from 95 to 96. I had plugged the hole in the back of the block and started the engine. Oil shot out all over the back side of my engine bay. So I installed the breather box and started it again. It wasn't running right. I took it to the school and had them run through it and try to find out what was wrong. They couldn't find anything. Turns out I was off by just one tooth on the cam timing. Fixed it and now I'm breaking it in. First race in it is on the 9th.

Old 1/4 mile avg. 15.9
fastest w/tail wind 15.7

We'll see what it runs when I get to the track.
0421091905.1.jpg