Originally Posted by
Jafro
Output level from the deck too high, or gain turned up to high on amplifier? What happens if you swap RCA cables from one to the other? Could the polarity of one of your speakers be backwards? I used to use a 1.5v AA battery and contact the speaker wires. If the cones move outward, the + is on the + side of the battery, then it's correctly in phase.
I tried all kinds of frequencies from the deck and gain and the only thing that made a difference was the gain but the lower i set it the lower the speakers got to the point where i couldn't hear anything.
I tried the ground loop isolator on the rca cables to the speaker amp and nothing. the constant loud whirling noise that goes up and down the gas is still there. I've been defeated.
A friend of mine teaches mobile electronics and upholstery but won't be able to look at it til friday......so no tunes for the week = fial. :sad: