Camber adjustments

Front:
-adjustable ball joint for upper control arm (Ingalls?; you need to know how much of an adjustment is needed; narrow range of adjustment for these; about 1.5 degrees; two models 0 to 1.5, 1.5 to 3)
-adjustable control arm mounts (Ingalls and others)
or
-replace upper control arm with one that the ball joint position can be adjusted along a range of +5 to -5 correction (might be hard to find)

Back:
-washers and longer bolts (inexpensive, not easy to adjust)
or
-adjustable upper control arms (Ingalls or Blox; should be easy to find many of the newer hondas use the same adjustment)

The big problem is stuff like that is getting hard to find for older cars.

Take Care,
ChrisS