b16a will work with custom mounts, axles and wiring harness if you want to do the wiring yourself u will need a service manual from both your existing car and donor car as well. if you are fluent in electrical wiring then it shouldnt be to much of a problem. you will have to wire in your vtec solenoid...do you have the ecu from the donor engine? is your lude auto or manual? i believe your shifter cable and shifter will work on b16a trans. if your car is auto you will need to swap in a brake pedal and your clutch pedal, install a master cylinder and the hydraulic line to your trans. and a few other things as well given your car is automatic. if it were my car...i would go b18c5...hope this helped u out