Thank you for the quick replies.

I ran to walmart, since it was the only place open, and bought their best plugs, which I just finished installing. I didn't even bother looking to see if they have wires, I will get those somewhere else.

When replacing the plugs, the metal end of the #2 wire pulled out of the boot, but I was able to slide the boot off and crimp the end back on. But, now I have a misfire code on both cylinder #1 and #2. So, even though I made the problem worse, I think you guys were right that it was a simple fix since #2 is misfiring despite what appeared to be an adequate connection. I fully expect that both #1 and #2 will work once I get those new wires... at least I hope so, it would be nice to drive home for christmas.