Thread: Front Brakes Dragging Need Help
View Single Post
Old Sep 16, 2008 | 01:04 PM
  #2  
Spec R's Avatar
Spec R
Moderator
 
Joined: May 2002
Posts: 14,429
Likes: 0
From: Beverly Hills, CA
Default
Originally Posted by chrisrbts98gs
I have a 97 Acura Integra LS with 117,000 Miles on it.

The front brakes have been dragging so I replaced all the brakes on the car with ceramic brakes and got the rotors machined. The front brakes are still dragging even though the seals in the calipers are not broken. (however the rear brakes aren't dragging at all) I also re-greased the caliper slides.

The hydraulic brake fluid has never been flushed so I am going to do that, but I am thinking it is probably that the brake master cylinder is going bad.

Any suggestions?

Thanks
yep try changing the master cylinder. does the dragging get progressively worse, like when the fluid gets hotter and hotter?
__________________
DB Squad
Integra Forum Moderator
2016 BMW 340i M-Sport / 2013 Chevrolet Volt / 1999 Subaru Impreza RS EJ205
Reply
0