Major Brake Problems....Please Help
First off i have a 94 integra gsr. about a month ago i replaced the brakes. i went with brembo slotted rotors, axxis pads and g stop stainless lines. right away i noticed some problems. the pedal will slowly go to the floor. so i bled the brakes again, and a third time just for good measure. this was fine for a few days, good pedal feel, and the braking distance was dramatically decreased. then the pedal starts to hit the floor again, but very slowly. so i replaced the booster first then the master cylinder a few days later. i did bench bleed the cylinder, and now it doesnt happen all the time but every once in a while the pedal will go to the floor. im all out of ideas. my clutch is slipping a little. not that i think one thing has anything to do with the other but i figured i give as much info as possible. any ideas would help.. thanks