It's just like doing the fronts, with the exception of the piston. Leave the e-brake cable alone, you don't need to do anything with it.


Mr Tegger shows you how to toque the piston back in:
http://www.tegger.com/hondafaq/Brakes.html#ScrewIt

To get the rotors off, you'll want to use an impact driver, getting in like 5-10 thwacks in if you use a hand impact driver before you try to torque it off. If you don't use an impact driver, you'll strip the screws and then have to drill the heads off.

It's just like doing fronts with the exception of the piston. I just my 04 Accord EX (4cyl) a month or so ago and didn't run into any problems. I had to add quite a bit of brake fluid after I was done, so you might want to watch for that.

For those who were looking for the PDFs, they're gone

https://www.honda-acura.net/forums/s...d.php?t=202100