The panel is held on by clips. First remove any screws in the door, dont have an accord, dont know where or how many. Then, carefully pull the door panel off. There are holes cut out in the metal part, they're there so you could access the screws holding the regulator on. First, remove regulator motor from the door, this will allow you to move it up and down to access the bolts which connect it to the glass. It's a bit of a pain in the ass, because you cant see the screws that you're removing and the space is a bit tight. You should have a rachett set handy. Also, dont forget to lube all joints on the regulator. It took me about 20 minutes to get mine out the first time.