I'm going to start working on my friends civic coupe. It's been on jackstands since 05. It's time for it to run again.

We will be putting on the following parts:

GC adjustable springs. 500/550 rear spring rates
Koni Yellow shocks
Fully polyurethane bushings replacement front and rear
4 wheel disc brake conversion.
new rotors
new pads
new wheel bearings in the front
new outer tie rods
the car will be corner balanced.
suspension will be factory with only negative camber added. 2 degrees in the front 1 degree in the rear (maybe).
new flaken azeneis tires front and rear
jim fab bars in the front
gsr front sway bar
type r rear sway bar (already on the car)
benen rear lower tie bar (already on the car)
skunk2 rear lca's
skunk2 pro front camber kit
blox rear camber kit
earls brake lines.
more parts still to come:


Pictures of parts we have already collected:
Bushings were purchased in April 04. To give you an idea of how much we've been procrastinating on this car.



the suspension pulled. Rear disc brakes ordered.



New Hawk HP+ Pads



New rotors front and rear



Rear camber kit by Blox



Stainless steel brakes lines front and rear



Skunk2 Pro front camber kit



40/40 prop valve. thanks to the guy who bought my old civic for telling me where to find it



Skunk2 rear arms with poly bushings. I love these things. Look great. light weight. Poly bushings in them already.



Some stuff is not pictured. I'll updated when I make progress. I"m busy with my own car so I haven't had time to start up on this project.

All parts ordered from Weaksauce. asiandoood said he'd tickle my balls if i said that. :rick: