One thing about the Antec case... I built a system in that case with a pc power and cooling power supply. The cables were nice and long to route along the backside of the case, but I had to take out the fan that is right smack dab in the middle of the bottom between the power supply and lower drive bay.

The bulk of all the cables coming through the plate with the hole in it made it impossible (for me) to run them with the fan in its bracket. I was unsuccessful in getting the fan back in after too. With you power supply choice (modular) you should be a-ok :thumbup:

The only cable that is a real stretch is the CPU power connector that runs to the upper part of the board by the socket. That was actually kind of a close call.

Also, new intel chips are coming this week. 45nm penryn dual cores with quads to follow in the spring. Same architecture as the core 2 duo but a shrink of the die. Cooler and faster!

I saw early reports of the 3.16Ghz dual core hitting 4.5Ghz on air