ok swaped lee's headlights around, hers some pix & showing how to do it so that you don't have to re-wire anything or adapt the other bulb holders.
Out with old:
The USDM Plug
The JDM Plug
The comparison:
Pulling off the old Rubber
Removing the other rubber
You must remove the tab oppisite of the large one:
This is the tool we chose to use:
Then all of the other's need to be shorted just a tad bit so that they will catch when u got to turn the bulb:
The one that was removed:
sweet fixed up plug vs. sexy hands (not mine! :rick
The completed product all test fitted!
Hope u enjoy it, there will be more to come from this weekend!