Ok here's a more brief explanation. The car is squeeking like crazy in the back and starting to squeek on the driver's side front.

It's a 94 with the original bushings so I'm assuming I need to replace them all anyway, so I'm just gonna swap out the LCAs. I'm thinking about doing the rear trailing arm bushings myself. I just need to get a hold of a Honda trailing arm xtractor.

Has anyone had experience putting in Energy Suspension polyurethane trailing arm bushings? How do you "recycle" the metal parts on the old bushing? (I'm talking about the metal sleeve that goes around the outside of the bushing and the "axle" that runs through the center.)