im probley going to use a p06 chiped to vtec and run a custom map, im going to retain use of a pm6 intake manifold due to the motor being out of an automatic it has a 3 wire IAVC or whatever it is, instead of the 2 wire like the manual and ill run it for a while at obd0 a bit later after i work out bugs, i will add all the wires in the stock harness and get everything done ill tretain the obd1+ injectors and depin and changed the clip so all the red wires with black stripe connect with the yellow wire with black stipe. basic wiring is simple i was wondering what about the crank sensor on the y8?