View Single Post
Old Oct 10, 2007 | 07:41 PM
  #5  
Integra94LS's Avatar
Integra94LS
Member
 
Joined: Apr 2005
Posts: 59
Likes: 0
From: CT
Default

Originally Posted by Spec R
yeah wipe up all that excess fluid, that stuff does a nice number on paint.

its likely that he may have pressed the caliper pistons back in without checking the reservoir causing it to overflow.

as far as the squishy pedal, do another bleed.
yeah i'll be sure to wipe up all the fluid, but most of it is under the hood by the bottom of the engine.
I didn't state before how he did do a rear caliper change on the driver side of the car. so that is probably right, is there anything I have to do now or is it fine and shouldn't overflow again?
I'm definitely going to do another bleed, cause there is obviously still air in the system.
Reply