i have a b18a block with a b16a head, pr3 pistons stock rods, arp rod bolts, and for some reason i cant get my oil pan not to leak! are the blue felpro gaskets no good for higher compression ratios than stock? ive tried torque'n down to the 8.9ft lbs witch is i think like 104 in lbs or something or another, that didnt work so i tightened it more and same problem, (its probley overtightened now!) What do u guys prefer on oil pan gaskets! im runnin around 11.5:1 CR and im wondering if this has any sayso on oil pressure! not too familiar with all the psi and stuff in the bottom end, oh and i did buy a moroso oil pan with the two extra bungs on it and my leak is commin from the back around the intermediate shaft.