Ok, so I get the turbo/manifold mounted in the car last night and there are some clearance issues. My downpipe hits the AC compressor and the wastegate actuator on the turbo hits a bleeder valve on (I think) a slave cylinder on the front of the block. I measured with a pretty ghetto spacer, and it looks like with about 1" of drop from the manifold will give me all the right clearances. Question is, does anyone know where to find a turbo to manifold spacer plate? I can't seem to track any down for the Td05 bolt pattern...I might resort to having one machined at a local shop, but it might cost a fortune. I was thinking of taking a gasket to them, since it's pretty much the right dimensions and having them machine that shape only an 1" thick instead of 3/16" or whatever the gasket is. But I'm hoping to find one online, so if anyone has one or knows where to get one, I'd really really appreciate the info!

Thanks in advance!