Mods, first post. If in wrong section please move to correct section.

I am looking for part numbers and/or a siupplier for the contacts that are used in a 95 Integra ECU connectors.
The car was flooded last year and salt water was also mixed in.
The car stopped running last week and wouldn't start.
I traced it back to the ECU and found many corroded contacts in the connectors.
I opened up the ECU and there was much corrosion and oxidation inside as well.
I have another ECU on the way. However I am positive that many of the connector contacts will need to be replaced.
There are 2 sizes . I have found out that the connectors and contacts are made by Tyco-Amp.
However I cannot find out part numbers for the contacts or connectors.
I called a few places but they were reluctant to divulge the part numbers and would only sell in super large quantities.
Does anyone know the part numbers for these contacts and where I can get them.
I am sure once I have the PN's I could get them from many of the major electronic parts distributors.
My other option is to go to the junkyard, cut off the 3 connectors from the harness, with ~ 6 inches of wire and then solder splice, heatshrink each wire connection.
Any help is greatly appreciated.

Thanks