I will tell u this about my allignment... (kinda odd) The place I purchased my rims from gave me a print out of all the specs. I saved them (there is a one year difference).

The older print out (2005)has 2 pages (and the times are 10 minutes apart). I think they1st alligned it and then made some adjustments or something 10 minutes later. However, the last of those 2 print outs, compared to the print out from the year after(2006), has many different numbers.

The "Rear Axle":
WHEEL-BASE DIFFERENCE (2005) was left at a final value of +22"3/32
WHEEL-BASE DIFFERENCE (2006) was left at a final value of -0"7/32

Would this signify anything? Also, in 2005, two weeks b4 this allignment was done, I switched from 18's to 17's (the 18s were way bent).

Other numbers:
FRONT AXLE: 2005 (start) 2005 (final) 2006 (start) 2006 (final)
total toe.........+0 degree,38' +0,0' +1deg16' +1 deg, 17'

camber (2005)....start+0,25'LH)(+0,14'RH); Final+0,26'LH)(+0,15'RH)
camber (2006).....start-0,38'LH)(-0,33'RH); Final-0,39'LH)(-0,40'RH)

caster (2005)....StartLH+3,30') (RH+3,55') FinalLH+3deg,29')(RH+3,29')
caster (2006)....startLH+3,04') (RH+3,40') FinalLH+3,04')(RH+3,40')

Do u notice anything strang here? Thanks!!!