I just replaced my upper balljoint, control arm, tie rods and steering stabalizer for left and right side. I have tien SS coilovers on a side note. One of the factory tie rods they could not install they said it was 1 inch longer and they could not do the alignment since the car is lowered. They put in my old ones that were cut off I guess so they would work. Now on my driver side I get a lot of wheel hop and my control arm clanking or bottoming out. I hope that my tien coilover is not blown. Do I need newer shortened tie rod or a shortened control arm with adjustable balljoint. The wheel hop is just really bad on that one side. Also I have a h22a swap I know its torqy but my friends isnt like this.