Originally Posted by
SHUA619CIVICSI
also im looking for full gasket sets,cams,cat back i can use a 88-91 civic and raceing clutch,just stuff i can put in when its out oh and a 88-91 intgra ecu thats a 5 speed, and a lightend flywheel, thanx for ne input
there isn't a complete gasket kit available for the DOHC ZC - the closest you can come is the 88-89 Integra D16A1 gasket set - i wouldn't get a complete kit, but would get the 88-89 Integra gaskets for everything above the top of the block (you will also need the seals for the valve cover bolts from Integra B18a1) and 88-91 CRX/Civic Si for everything below the top of the block - we run Crespo cams in ours and are very satisfied with them - i would recommend that you not go lighter than about 10lbs on a flywheel and use a moly flywheel instead of aluminum - for the clutch, i would recommend the ACT Extreme Pressure plate and ACT Street Performance disc - we use that in our drag car launching and shifting at 8000rpm on slicks and it performs flawlessly - the ECU you want is PG7 from 88-89 Integra manual transmission