I have gotten my b16 back together and I am having real problem trying to get the belt on with the timing marks directly at each other on the cams. It seems that if i get it on the exhaust cam that it doesn't line up w/ the intake cam. The only way it will line up is if I have the intake cam one tooth off. I have the tensioner bolt loose and have plenty of slack. I am wondering if I have the cams lined up wrong. I have the intake cam lined up in the middle of the cam girdle and the exhaust mark is lined horizontally with the intake cams. Is this right because the haynes manual I is not really specific and the pic is terrible about it. Any help or pic would be awsome. I have stock cam gears on ctr cams and ctr underdrive. Thanks