Thanks Littletimmy, I finally got it. I found the plate, took all the crap off around it, took it off and inserted an alan wrench between the teeth of the flywheel. Sure beats paying $60 for a special tool.

I tried using an air powered impact wrench but that didn't budge it. Finally, I used an 18" breaker bar with a 1/2" drive, with an adapter to fit my 3/8" drive 19 mm socket. Well, I broke two of those adapters so then I just bought a 1/2" drive 19 mm socket. I leg pressed the fvck out of it and the damn bolt finally gave up and broke loose. I was about to give up and put all the sh1t back together and bring it to a shop. That woulda been teh :ghey:.

:yay: