I contacted Koni about possibly obtaining a threaded sleeve for these shock to gain some extra ride height and prevent the rubber mounts from getting chewed up. Heres what I asked, does that sound like a good fix?
I have the H&R Cup Kit (31154-1) uses Koni Shocks for my 95 Special Edition Acura Integra. the struts stick up too far and its causing the shock absorber mounting rubber bushings to get chewed up on all four wheels and also causing clunking sounds because its not a tight fit. I am wondering if you have a threaded sleeve available so I can slide the sleeve onto the shock to rest on the circlip and have an adjustable perch for the spring. I need to do something very soon as I feel my vehicle is unsafe to drive. I need to have the spring rest up a little higher on the shock. Please contact me asap.