AND ANSWER IS: If there is a resistor box in the car, your stock
resistance is Peak and Hold-Low resistance. If you do not have a
resistor box, you should run Saturated type. The part number, SL9-440,
is an Saturated injectors that flows 440cc/min. The size 440cc/min is
available in Saturated type only. If you have the resistor box in your
car still, you can still run Saturated type injectors with no problem,
but not reversed. If in the future you are planning on running an
aftermarket computer, you may need the same Peak and Hold
resistance though.