I'm getting out of imports and cleaning out as much of my storage that sells.

Price is $1200: FOR THE TURBO KIT below.

D series 1992-95 EX/SI transmission with about 110k - no grinds, slips, or whatever bunk things are listed to find a bad transmission - $125 obo

and another...

D series 1992-95 EX/SI transmission with about 160k - [i]Grinds? Couldn't tell, probably. Slips? No. Whirring sound? Yes. Had no problems with it, but on downshifts I could hear a whir. Drove on it over 7k like that. Had the backup above so never worried. Drive on it, fix it, take it for - $50.

3 or so D16Z6 IMs some w/ sensors others w/o the sensors - make offers

6.5 Pioneer speakers - $20

Acura Legend cd changer - mounting brackets, cd to changer net cabling, no cartridge

FS/FT power window and door locks conversion:

2/3 door
black door panels w/tweeters including driver/passenger side power switches
OEM door lock acuators
regulators w/motors
power window relay
power lock control box
... and perhaps the under dash wiring driver and passenger (you'd have to do wiring for the speakers)


Open to offers with or without trade of your manual items.

TRADES are for LOCALS to JAX, FL ONLY and on power/window door lock conversion only

Also... :

D-series Apexi turbo kit:- (IHI turbo, manifold, downpipe - turbo has no play and spins freely. used for under a year)

1992-95 Civic intercooler piping: - intercooler piping to accomodate 6 inch intercooler/charge pipe has Greddy RS on it- piping in good condition with a few defects from cut edges and welding beads

What's ACTUALLY included in THIS kit:

IHI turbo (no shaft play/spins freely)
exhaust manifold
downpipe w/ o2 sensor
intake pipe with filter
JRC intercooler (NEW) - dimensions will be posted it's a small detail DONT ASK
2.5 inch charge pipes with Greddy RS bov
Greddy boost and egt gauges with all accessories (a ding on the outer ring of each gauge)
Greddy Profec B ver. 1 (MINT)
RC 440 injectors w/ clips
oil sandwich adapter
**also adding in (NEW) ACT clutch disc that : If used with ACT's heavy duty pressure plate they rate it at 223 ft-lbs of TQ (more than double stock) and when used with their Xtreme pressure plate they rate it at 270 ft-lbs of TQ**

What you'll NEED
oil return lines for turbo and oil pan
ECU or fuel management

Feedback from other users:
http://www.honda-tech.com/zero...age=1

The BAD, but NOT really. I purchased this from the original owner, whose car was stolen and recovered with this turbo on it. They scratched off the serial/spec and info on the turbo when attempting to sell it. http://hondamarketplace.com/zerothread?id=1662263



TO ENLARGE PICTURES right click the picture to get the url and change the "s26" to "L26" and add th_ before the IMG




Located in N. FL if you want shipping you're either paying or I may consider other options depending...

If interested IM/PM or post and I will get back to you. I have references available on H-T, Club SI, and through Heatware. Feel free to ask about me here or anywhere else(I've only sold a few items here). I appreciate it, thanks.