View Single Post
Old Sep 23, 2002 | 08:46 AM
  #1  
Puzzler's Avatar
Puzzler
Junior Member
 
Joined: Sep 2002
Posts: 3
Likes: 0
Default 1991 Integra... won't crank

Okay, first post for a newbie...

I have a 1991 integra, (stick shift) won't turn over from the key. -Worked for years without a problem... (until now!) -Here'a how far I've traced it:

I know that the starter and solenoid are both fine, because if I pull the solenoid "trigger" connection and jump it straight to the battery positive, (in Neutral, of course!!!) it turns over and the car will start.

I have positive power at the black wire with a white stripe when I turn the key, so I know that the ignition lock/switch is okay.

I'm not sure how the clutch pedal starter inhibit works... I thought it might just be in series with the starter 'hot' wire, but it seems there's a couple of different-colored wires going there... jumping the connector with a paper clip doesn't help...

Can anyone help?

-Is there a starter relay somewhere that I should check?

This was so much easier on the really old cars!!!

Many thanks in advance,

Keith
Reply