Originally Posted by
wedley2
just to clarify...
engine was freezing cold?
if the tolerance is from .09-.12
make sure you tighten it at .09 (im making these figures up)
after my valve adjustment, it is still a bit clacky.
Yes. The engine was as cold. I did the adjustment first thing in the morning so it sat all night. Tolerance was .09-.11 (intake) and .11-.13 (exhaust). I got it closer to the min than the max but some were probably .095 or .115 rather than the absolue min (.09 &.11 respectively). When I do it again I'll make sure to do the min.