Ok, I did this for my mids and tweets in my '94 accord. It was a real pain, but if you take your time it's ok. Look at the rubber boot that feeds the door from under the dash, pull away the rubber and you'll see a molex plug. I have yet(in 12 years installing) ever seen an Acord plug that uses ALL of the available slots. I drilled out the lower sections, maybe 1/4 in holes and whala, ran my wire right into the door. You will have to unplug the molex, and pull the hinge pin so that the door opens a little further than normal, you'll need the access room! Good Luck