ok, i have all but the last two done, and have had them done for sometime now. I just didn't take any pics while doing it. This DIY will basically be a quick over view of how you can do it. It will cost ~$25

PARTS:

-- 2 relays that can handle the amperage of your fog lights I got two of these:



-- 1 pc board (not necessary, but will make the setup easier)

-- 1 project box that can house the realys and board

-- roll of wire, I opted for the four strand wire so that I had four different colors.

TOOLS:

-- Soldering Iron

-- Solder




STEP 1:
Mount the Fog Lights however you wish, but do not hook them up to a switch or to the battery. Just find a good ground for them and go ahead and ground them.

I mounted mine like so:

2.jpg

This way I didn't have to drill any holes or modify my car for them.


STEP 2:
Get all the parts for the relay box. Stagger the relays on the pc board like so:

1.jpg

will finish updating later