Originally Posted by crxmex
ok no more codes got the 2 connectors on the back mixed up so i pulled the hazard fuse and reset them after i switch the connectors to the right ones. the light went off and didnt come back on. i even push started it to see if it would trigger the cel, but it didnt so that's taken care of. my car is a obd0 car. only thing left is to get it starting.....bye the way my main relay doesnt click when i turn the key....i coulda swore it's supposed too. right?
So the engine isn't even cranking? If it's not cranking, then make sure your battery is good, check grounds, voltage, etc... Also listen to ensure your fuel pump is turning on. If you listen carefully, you can actually hear a buzzing noise which indicates it's working properly. Also, if you're main relay isn't clicking on then off(and your CEL also), then it could be the relay. If the engine is cranking, then u probably have a hose or sensor incorrectly hooked up on the intake manifold.