Originally Posted by CivicSiRacer
I have the same motor mount bushings. If you notice the picture one zip tie goes through one hole and ANOTHER goes through the other. What you did was cover the hole so now you cannot reinstall the mount back into the car unless you cut the zip tie.
:slap:I don't think you're reading this properly. The pics you see are from a thread I found. They are not my pics
. The guy did mention to take a hook and stretch the zip tie down so you can put it back on. My question is if you have to poke a hole in the stock mount to get the zip tie through.
Thanks for helping me out
