I have an ongoing suspension problem and want to ask anyone for help.
The Other Dave suggested I open this up for discussion.

Problem: I bought my son a 95 Integra RS with 165,000 on it. As it turned
out, alomost everything on the car had to be rebuilt or replaced. New A/C,
rebuilt motor for eventual turbo etc, etc. I'm almost thru, but one problem still exists. The rear end is very loose and even unsafe. When going above
55 mph and into a corner, the rear end wants to come out, to the point of it being very unsafe. Unless I can figure this out, I'll have to sell it. I have
a ton of money in this car, and would like to hold onto it if possible.

What I've done for this problem up to now:

H&R race springs
KYB AGX struts
Front shock tower bar
23 MM rear sway bar
New tires - 205/50/15 Dunlop tires
GSR blades
New front end links ( were bent )
Polyurathane bushings front to back
Last alignment - front camber off by -1.5
Not sure what rear showed.

HELP - HAS ANYONE ELSE HAD THIS PROBLEM!

My mechanic wants to take it to a good alignment shop and see what they
find. He feels that the rear camber, and toe in or out may be the cause.
Are there ways to correct the rear camber and toe in or toe out numbers?
Also, I don't think the front camber is the cause. Is this an error on my
part?

Thanks,

Doug