Originally Posted by eonsx311

if you are going new with the turbo the brand choice is up to you. i would research that based on what your needs are. as for the mods to the motor, what you would really benefit from would be forged rods and pistons (low compression) rings if they are needed (do a compression and leak down test), and some ARP head studs. This will allow you to turn the boost up higher and inturn create more power from the turbo you select rather than using N/A mods like cams and new valves. yes, those will add power but making the motor able to handle the boost better is a good goal to start with. you should go here www.homemadeturbo.com and read everything. it helped me alot...