Before, on my old black Accord I:

1. Wetsanded it with 2000grits Sand paper
2. Used 3M Fine Compound
3. Used Meguiars Medium Cut Cleaner
4. Used 3M Polish Glaze and Meguiars #7
5. Meguiars #26.

All of those was professional stuffs and I had to used an 7" orbital polisher. It came out very nice and shiny. And I tested it a lil on my Red car, doesn't work that well (the two polishes) so I decided not to use them. may be it's because I'm using wool yellow polishing pad since I lost my foam pads???

However, for my Red G35C, I also don't want to wetsand the car. So I'll figure that I'd:

1. Clay bar it - (did it last week - Came out nice, I put 1 minor coat of Eagle1 Nano Wax on it for temporary protectant. Will Clay bar again)
2. Strip off all the wax - What to use?
3. Cut Cleaner - What to use?
4. Polish - What to use?
5. Glaze - What to use?
6. Wax it (3-5 Coats) - What to use? S100?

I want the absolute protective and shiness on my car and would protect it for a while (4-6 months) without waxing every month. It has to be better than what I used above. But I can't find any??

Thanks guys