Originally Posted by starky34
that's what I'm wondering!!! i took the shims off and rotated the caliper up after that i went to take the pads off they are just not coming off. I rotated the roter to make sure that it wasn't rusted on it wasn't i have no clue what is holding it on
So you took out the bolt at the bottom of the caliper, swung the caliper up and out of the way, and the pads are stuck in the caliper?
How did you get all the shims out without removing the pads?
Someone may have used the wrong pads on the last changed and they have seized themselves into the caliper.
Try a big C-clamp, like you would used to press the piston back in on the front.