Originally Posted by crxmex
i was just wondering becuase i've heard b16's breathe better.i am also looking for some input on this matter of building one "bang for the buck". i already have intake, exhuast, dc header and chipped pr3 ecu. what would yall buy next if it were yall.
Well whats see here. Use the B-16 head with some aftermarket 12.0 to 1 pistons, u could use CTR pistons I would advise against them my opion though. I would get some crowler stage 3 cams or of = specs. also the valve train is very!!!! important. Cam gears cheap but good, the more adjusting bolts the better, at least 4 bolts. If you have money or time port and polish really gets the motor running. one last thing Hondata S300. Max horsepower on a fine tune, with all stock fuel componets. a rough estimite on HP around 170 to 185 to the wheels, and don't forget a good low gear trans as well.