Nope.

After my last post I did some HAN research on master cylinders. I'm leaning towards a bad master cylinder now.... When I bled the brakes I pushed the pedal all the way to the floor, and it seems YOU SHOULD NOT DO THAT!!! Corrosion at the end of the cylinder eff's up the seal since the pedal really never gets pushed down that far. Ooops.

My favorite way to learn something is the hard way. Duro de aprender, pendejo.


Now my attention is focused on how I can rebuild the MC instead of replacing it. Unfortunatly HAN research is coming up short in this area....