View Single Post
Old Apr 22, 2006 | 07:21 PM
  #9  
mishqua's Avatar
mishqua
Senior Member
 
Joined: Feb 2006
Posts: 155
Likes: 0
Default

Originally Posted by First-Bass
where you located, and check here you may be able to find another shop around you

whats the deal, whats your plans, cause the dynamat is important but you cant remove and reuse it, i would get the system, then worry about dynamat later, fixx the rattles and such.

be quit sux,

/be quiet
/feebay
they are ruining every product and manufactuer

would you buy a generic honda civic called conda hivic? just cause its cheaper and runs good

the dynamat brand stands out above the rest, run a test between the 2 and hear the results

its like an oem filter vs. K&N,

dynamat is enginered to deaden sound and stop rattles,
be quiet is enginered to be CHEAPer, thats all.
I did test both there just wasn't enough difference between the two. I installed it in the trunk of my brothers 03 civic, about a month later I put b quite in my trunk 03 civic. I put two layers on my trunk, true its not as thick as dynamat. like I said there wasn't alot of difference they both stick great as long as ya do a good prep. Dynamat for trunk was about 100 bucks or so can't remember b quite 100sqft 100 bucks. I did my whole car doors floor board rear deck. I don't have a single rattle. It really depends I guesse how big ya want to go. If your putting in somthing insane may be ya wanna go with dynamat. All I can tell ya is the b quite has been in my car 2+ years and still performs the same as when I put it in, with no saging.

Last edited by mishqua; Apr 25, 2006 at 12:53 PM.
Reply