Step 7.

try not to touch the display area of the gauge, finger oil = no good. nasty looking.


Step 8.

the green blocks indicated on the picture is the amount of space we have for this project, and agian, this varies for each application.


Step 9.

back of the speedo incase some of you are wondering..
To explain bit more on the shades behind the gauges...black/dark spots are where the bulbs lie to light up your gauge.


Step 10.

More refenrence for your future work. as captioned on the picture, some empty portals for your wires to go through, if you can't find any, drill a whole on side of the gauge cluster if you aren't a wuss.


Step 11.

make your measuring...and cut the bord according to your measurements.


Step 12.

Yess.....