Aight, well I tlaked to Ryan from Rywire, this guys is great with the help department, I reccommend him highly. My problem of not starting, was that I had to change some wiring around at the distributer plug, once I changed the distributer plug wires and re pinned a few things, it started up. But now it is only running on 2 cylinders. I set my TPS to .45v. I aas told that is factory spec. Anywayz, I need to figure out why it is running on 2 cylinders now. I took the fuel rail off and held all the injectors on with my hands and watched them all shoot fuel and atomize, so the injectors are all working, I checked continuity on the injectors, and they are all on the right spots, I guess the only thig that would make cylinder number 1 and 2 not run is spark, I am going to try the new distributer that I got from Rywire when I get it in on Thursday. Would a rotor or cap that is meesed up not fired onlike 1 or 2 cylinders but on the others? Any comments, let me know.