I followed a diagnostic thing i found on another site. And it looked good all the way up to where i had to test a wire for the ECU which it showed I should have in my harness but didnt. Anyway, it all showed out good. I originally had to extend the wires for the sensor and thought I messed them up. SO i pulled them apart, and soldered in new wire hoping that would fix it but it didnt. When checking the plug i got power where I should, and didnt have power where i shouldnt it appeared. Im at a loss. Im going to a local salvage yard tomorrow to see if i can buy or borrow a ECU from one of their cars if possible. Im hoping that since im throwing other codes as well it may be a faulty ECU since i did buy this one off ebay.