Hi guys, I am new to the Civic world. I have been researching on Civics for a year now. I just turned 18 and I currently own a 96 Ford Escort LX. Which will own a civic (2.0SPI stock v. stock).

Anywho, I am in the process of buying a 94 5thgen civic dx or ex. I found a good condition civic for $2k, but a 200k mile engine. Anyways, I have some background knowledge on the series of hondas/acuras and I plan on doing the b18b swap. I'ma stick with OBD1, not the b18a. The car im getting is a 94 EX with auto tranny. I've done an auto to manual swap in my Escort a few months ago. Since I plan on doing the B18b swap into my Civic, I know I'm going to have to get a b-series tranny, so I will be doing auto to manual swap as well. Around here I can get the b18b motor and tranny from an RS, LS, or GS for less than $1k. My Escort motor and 5spd tranny was $900. So hey!!

I know the rules for forums, I've searched honda-tech and honda-acura. I've gotten the answers that I wanted, but I got TOO many different ones and I'm all confused. If you guys could kindly post the whole nine yds in this thread, it would help me and every other member out there.

What all will I need extra to do an auto to manual swap to the B-series in the 5thgen DX or EX??
For starters I know(Based on my knowledge from my Escort atx to mtx):
*5spd B-series tranny(doesnt matter which one right now, what year model)
*MTX Brake Resovoir
*MTX Clutch MC
*Slave Cylinder(should be on tranny)
*MTX Pedal Cage
*Shift Linkage(what to get??)
*Axles(what to get??)
*B-series Clutch Kit(staying OEM for now)
*Flywheel
*Tranny Mounts(which ones?? w/o need for welding or will i need swap kit?)
*MTX ECU(I used my ATX ecu on my escort when i did swap, if its the same i can get the car running. i know there wont be Rev. lights)


What all will I need to do the b18b integra engine swap into a 5thgen??

I dont have emissions here in SC, but i dont wont to go thru any wiring hassles between OBD types, so i plan on sticking with 94-00 OBDI/II RS, LS, or GS only B18 engines.

I know I need the RS, LS, or GS Acura Integra engine from 94-00.

What else would I need??

At the j/y's here, the wiring harnesses are still on the engine, as well as the distributor and accessories bracket.
I plan on keeping A/C no doubt. I guess I have to buy a motor mount swap kit also. What about the exhaust manifold? Will the b18 line up to the 94 exhaust??

So if someone could kindly tell me what all will I need to do the complete swap over, that would be great!!!

Thanks,
Xscort (Proud owner of two rivals, Escort vs. Civic) Muahahhaa