Okay, there was quite a few who wanted this, so McChad did the text and I took the pictures. Here you go

Many 6th gen Accord owners have the bomb ride. But if you have an EX non-leather or LX, DX model life may seem a little plain with the budget cheap injection molded vinyl wheel. Feeling the blues from not having the swankness of a leather wheel? Have no fear there is something even better then the OEM leather wheel cover, how about the OEM leather wheel?

The following install will work with any Honda Gen 6-leather wheel. This particular application uses an Acura type-S (TL/CL) wheel installed in a LX sedan (Schmiddy’s Car). These wheels can be purchased at your local dealer cheap, how? Many Acura customers upgrade to the wood grain wheel. The dealer will sell you the old ones if they have it, just call and ask. The same applies to Accord, Odysseys, and the like.

Here's the wheel before install:



[Make sure front wheels are perfectly straight!]

First remove the airbag: Unplug the battery and wait 3 minutes for the system to drain. Then remove caps from the side of the wheel in front of the turn and washer switch arms & remove cover on bottom of the wheel. Disconnect the air bag and horn connection from the panel under the wheel.



Remove the torx bit screws from the side access panels and remove the air bag.