Originally Posted by tegbooster

there is a bleeder valve behind the radiator...
-loosen that nut, but dont remove it
-once you get liquid coming out (brake fluid) tighten it again and fill the brake fluid resevoir
-pump the brake 10x
-open the bleeder valve until liquid comes out smoothely...
-continue to do this until
-the brake feels normal
-the resevoir is full and your not losing liquid
-once u think ur all set...take it for a very slow test drive around a residential area to make sure the breaks are working properly... check the fluid levels when your done....if they are all full...ur good to go....if they are decreasing then u may have a leak or you still have air bubbles in the lines

good luck !