View Single Post
Old 12-11-2005, 02:11 PM
  #6  
ItsaHonda
Senior Member
 
ItsaHonda's Avatar
 
Join Date: Jun 2003
Location: Orlando, Florida
Posts: 489
Likes: 0
Received 0 Likes on 0 Posts
Default

Agreed. Belt screetching would be a result of tension being too loose, or the belts could be defective. I had this problem on my 96 after I replaced the original accesory belts w/ cheap aftermarket. Had problems from the get-go. Tried both loosening and tightening the tension to no avail. Finally, had them replaced again by Honda when I had the t-belt done... no problems since. I believe Honda uses Gates belts, but don't quote me on that.

Good luck.